itti

Voltage Controlled Crystal Oscillator (Through Hole)

Specification

Part No.	Example
OC10 series - Waveform - Stability - Freq - Vcc-Pulling	OC10HB-13.000-12.0V-D

Specification	OC10
Frequency Range	1.250 ~ 40.000 MHz
Output Waveform	HCMOS / TTL / Low Voltage CMOS
Frequency Stability vs. Temperature	A: ±5x10^-8 0°C to +60°C D: ±5x10^-9 D: ±5x10D: ±5x10
	B: ±1x10^-7 -30°C to +70°C E: ±1x10^-8 -30°C to +70°C
	C: ±2.5x10^-7 -40°C to +80°C F: ±2x10^-8 -40°C to +80°C
Short Term Stability	2x10^-10 / sec 2x10^-11 / sec
Rise and Fall Time	6 nsec max. (10% / 90% Vout)
Frequency Stability vs. Load Deviation	±0.01ppm/year max. @ ±5% delta or ±0.003ppm/year max. @ ±5% delta
Frequency Stability vs. Supply Deviation	±0.015ppm/year max. @ ±5% delta or ±0.002ppm/year max. @ ±5% delta
Frequency Stability vs. Aging	±0.3ppm/year or ±0.05ppm/year
Supply Voltage (Vcc)	12V, 5V, 3.3 (optional)
Power Dissipation (Steady State)	1.5W max.
Heat Up Power	3.6W max.
Heat Up Time	3 mins max.
Duty Cycle	40 / 60% ( at 50% Vcc)
Pulling	N: No frequency adjustment / D: ±4ppm (typ.) / E: ±0.5ppm (typ.)
Phase Noise	Offset	Phase Noise
	10Hz	-100dBc/Hz
	100Hz	-135dBc/Hz
	1KHz	-145dBc/Hz
	10KHz	-150dBc/Hz

Dimension

Note: This is a typical parameter spec., please contact us for detail Specificationheet.

[ Back ]